RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050088 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  REMOVAL  


PROCEDURE

Hide 53875A 2.REMOVE FRONT FENDER LINER RH

a.
E268384

Using a screwdriver, remove the 6 clips.


b.

Partially remove the front fender liner RH.

HINT:

It is not necessary to fully remove the front fender liner RH. Partially remove it so that the front bumper assembly can be removed later.



Hide 3.DRAIN WASHER FLUID

a.
E268371

Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

HINT:

Use a container to collect the washer fluid.



Hide 85310 4.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E268372

Disconnect the connector and hose.


b.

Pull out the windshield washer motor and pump assembly from the packing of the windshield washer jar assembly.


Hide 85301 5.REMOVE WASHER INLET SUB-ASSEMBLY

a.
E268373

Remove the clip.


b.

Pull the washer inlet sub-assembly upward to remove it from the windshield washer jar assembly.


Hide 85330 6.REMOVE WINDSHIELD WASHER JAR ASSEMBLY

a.

Disconnect the 3 connectors and detach the 6 clamps.

E268374


b.

Remove the 3 bolts. Then detach guide A and remove the windshield washer jar and pump assembly.


Hide 85280A 7.REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

E268375

a.

Remove the headlight cleaner motor and pump assembly.


Hide 85942 8.REMOVE HEADLIGHT CLEANER CONTROL RELAY

E268376

a.

Detach the claw and remove the headlight cleaner control relay.


Hide 85397 9.REMOVE LEVEL WARNING SWITCH ASSEMBLY

a.
E268377

Pull out the level warning switch assembly in thedirection indicated by arrow in the illustration toremove it.